Digital Video

History

Early experiments with digital video were first accomplished throughout the 1960s by the research departments of entities such as the BBC and Bell Laboratories, both developing such to eliminate the introduction of noise and distortion on video feeds for television sent over the terrestrial microwave relay and coaxial cable circuits of the day.

Also starting in the late 70s to the early 80s, several types of video production equipment, such as time base correctors (TBC) and digital video effects (DVE) units (two of the latter being the Ampex ADO, and the NEC DVE), were introduced that would operate by taking a standard analog video input and internally digitizing it. This made it easier to either correct or enhance the video signal, as in the case of a TBC, or to manipulate and add effects to the video, in the case of a DVE unit. The digitized and processed video from these units would then be converted back to standard analog video.

Later on in the 1970s, manufacturers of professional video broadcast equipment, such as Bosch (through their Fernseh division), RCA, and Ampex developed prototype digital videotape recorders in their research and development labs. Bosch's machine used a modified 1" Type B transport, and recorded an early form of CCIR 601 digital video. None of these machines from these manufacturers were ever marketed commercially, however.

Digital video was first introduced commercially in 1986 with the Sony D-1 format, which recorded an uncompressed standard definition component video signal in digital form instead of the high-band analog forms that had been commonplace until then. Due to the expense, D-1 was used primarily by large television networks. It would eventually be replaced by cheaper systems using compressed data, most notably Sony's Digital Betacam, still heavily used as a field recording format by professional television producers.

Consumer digital video first appeared in the form of QuickTime, Apple Computer's architecture for time-based and streaming data formats, which appeared in crude form around 1990. Initial consumer-level content creation tools were crude, requiring an analog video source to be digitized to a computer-readable format. While low-quality at first, consumer digital video increased rapidly in quality, first with the introduction of playback standards such as MPEG-1 and MPEG-2 (adopted for use in television transmission and DVD media), and then the introduction of the DV tape format allowing recording direct to digital data and simplifying the editing process, allowing non-linear editing systems to be deployed wholly on desktop computers.


As of 2007, the highest resolution demonstrated for digital video generation is 33 megapixels (7680 x 4320) at 60 frames per second ("UHDV"), though this has only been demonstrated in special laboratory settings. The highest speed is attained in industrial and scientific high speed cameras that are capable of filming 1024x1024 video at up to 1 million frames per second for brief periods of recording.